Usual 7 Days After Confirmation of The Sample or a
OEM/ODM
Welcome
Certificated
ISO 9001:2008
Transport Package
Carton
Specification
per your request
Trademark
Walle viton GLT o ring
Origin
Guangdong, China
HS Code
4016931000
Production Capacity
100, 000PCS/Month
Product Description
Product Description of VITON GLT 600S
DuPont Viton
GLT-600S fluoroelastomer is a 64% fluorine, peroxide-cured, low temperature
fluoroelastomer. GLT-600S utilizes the latest technology from DuPont, Advanced Polymer Architecture
(APA), which includes a novel peroxide cure site along with an optimized molecular weight distribution.
Features
• Cures exceptionally fast to a high state of cure
• Similar to improved low temperature properties compared to Viton GLT
• Improved mold release/mold fouling properties
• Improved mold flow and less shear sensitivity for a 65 Mooney peroxy cured FKM
• Excellent physical properties with high elongation, both original and aged
• Heat, fluids, and low temperature resistance comparable to Viton GLT
• Improved water resistance / lower volume swell in water
• Excellent compression set resistance with either low or no postcure
Processing
A load factor of 72%+ for internal mixing of GLT-600S is preferred. The suggested process aids for
GLT-600S are 0.75 phr of Struktol
HT290 either alone or in combination with 0.5 phr of PAT-777, or
combinations of 0.5 phr Armeen
18D with carnauba wax or Struktol
WS280. The use of DIAK 8 is
NOT suggested as it causes poor mold release and high compression set. DIAK7 (TAIC) is the
suggested coagent for all GLT-600S compounds, and is usually used at a 3 phr level or lower unless high
modulus is needed. High levels of TAIC can bleed out and cause molding flaws. A peroxide level of 1.5 to
2 phr is suggested for this fast curing FKM polymer.
Safety and Handling
Before handling or processing Viton
GLT-600S, read and be guided by the suggestions in DuPont
technical bulletin "Handling Precautions for Viton
and Related Chemicals."
Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.
Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.
We have the highest quality and lowest costs in the industry delivered on time.
Any questions for High Temperature Resistant Viton O Ring/Rubber O Rings, please do not hesitate to contact me. It is our pleasure to be on service of you!
Audited Supplier 
){kind=link}