• Gfd Standard Type 1101 PTFE Radial Seals
  • Gfd Standard Type 1101 PTFE Radial Seals
  • Gfd Standard Type 1101 PTFE Radial Seals

Gfd Standard Type 1101 PTFE Radial Seals

Structure: Single End
Pressure: High Pressure Mechanical Seals
Speed: Ultra-High-Speed Mechanical Seal
Temperature: High Temperature Mechanical Seal
Performance: Temperature
Standard: Standard, Nonstandard
Samples:
US$ 0.001/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Miss Amica Lee
Seals Representative
Gold Member Since 2016

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
GFD Standard Type 1101
Type
Spring Seal
Color
Black
Size
Per Your Request
Transport Package
Plastic Bags for Inner Packing of Seals
Specification
per your request
Trademark
walle seal
Origin
Guangdong, China
HS Code
4016931000
Production Capacity
100, 000PCS/ Month

Product Description

GFD Standard Type 1101 PTFE Radial Seals
GFD Standard-Radial Seals

Type 400, type 103, type 401, type 402,Type 4VS,Type 414,Type 4FM,Type 113, Type 123, Type 103H, Type 143,Type 403, Type 304, Type 1100,Type 2100,Type 404, Type 314, Type 1101,

Seal Selection and Operation Range
The wide variety of types provide the opportunity to meet all sealing requirements for axial and radial seals. Not all maximum stresses can be applied to the seal at one time.

The variety of designs,jacket and spring materials, together with several springs and dimensions allow sealing applications within the following working ranges:
Temperatures from -250°C to +316°C
For rotation and reciprocating movement up to 5 m/s
For static applications up to 3500 bar pressure
For dynamic applications up to 550 bar pressure
Universal chemical-resistant
For vacuum and UHV applications
Diameter from 2 mm up to 3000 mm
Material Description Temperature Range Degrees [°C]
PTFE-virgin -250...+205°C
Recommended for low to moderate dynamic or static service. Low gas permeability. 
FDA approved. Good cryogenic (low temperature) properties.
PTFE-virgin modified -250...+215°C
Recommended for low to moderate dynamic or static service. Lowest gas permeability. 
FDA approved. Higher creep resistance, very high chemical resistance.
PTFE-reinforced with Carbon and Graphite -130...+290°C
Very good universal properties for higher temperatures and resistance to wear. 
Especially suitable for hot water and steam service as well as for poor lubrications.
PTFE-filled with Graphite -130...+290°C
Excellent general purpose material with low friction, good wear and heat resistance. 
Non-abrasive. Good for water service, dry or poorly lubricated applications.
PTFE- filled with Glass fiber and MoS2 -155...+290°C
Extremely abrasion resistant, recommended for high pressure hydraulic, water and
steam service. 
At high speeds and with soft metal surfaces may be abrasive wear possible.
PTFE-reinforced with special filler -155...+316°C
Superior wear and heat resistance. May also be used for soft metals. No abrasive wear. 
Recommended for static and dynamic service, high temperatures and high speeds.
UHMW-PE modified -240...+104°C
Excellent wear resistant, but limited chemical and heat resistance. Especially suitable 
for abrasive media and water based liquids. FDA approved.

Contact information:
Dongguan Walle Sealing Technology Development Co., Ltd
Tel: 86-769-33291139 / 22762051
Mobile: 13620011767
Fax: 86-769-22762052
URL: walleseals.en.made-in-china.com

 

Send your message to this supplier

*From:
*To:
avatar Miss Amica Lee
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now